Orlaco 7 inch built-in monitors (DIN)
The Orlaco 7-inch LEDD built-in monitor is available in different versions depending on the application and your requirements. These monitors can easily be built in to a dashboard with two open DIN slots.
The LEDD monitor has a 4-pin Orlaco camera connector and is suitable for all UNI vision systems.
The LEDD Serial is a serial monitor with a 7-pin camera connector. This makes serial communication possible between camera and monitor.
The SRD monitor has been specially developed for all vision systems in combination with Orlaco RadarEye.
The CAN monitor has been specially developed for vision systems using CAN bus communication.
-
7 inch Cold Store RLED Double DINN monitor 12...60V with 4m cables
0209390 -
7 inch LEDD monitor 18...32V with 2m cables
0221000 -
7 inch LEDD monitor 12...60V with 2m cables
0208203 -
7 inch LEDD monitor 18...32V with 4m cables
0221010 -
7 inch Serial LEDD monitor with 2m cables
0208440 -
7 inch Serial LEDD monitor with 6m cables
0208232 -
7 inch CAN SRD LEDD monitor with 6m cables
0208371 -
7 inch CAN LEDD monitor with 2m cables
0208242