Vision is our Mission®
In Orlaco's view, there should always be optimum vision around all agricultural machinery. Orlaco works closely with OEMs across the world to integrate camera monitor systems. In addition, Orlaco develops and manufactures standard and custom vision solutions specifically for the aftermarket. Our camera monitor systems are developed and produced according to the highest quality standards. Specifically, we comply with international automotive standards such as IATF 16949, work with proven automotive methods such as APQP/PPAP and are affiliated with the AEF (Agricultural Industry Electronics Foundation). Our products are robust, compact, dust and waterproof (in line with IP68 and IP69K), are resistant to extremely low and high temperatures, have high shock and vibration resistance and meet the highest EMC requirements.
With an Orlaco rear-view camera on your tractor, trailer or machine, you can gain a better view of the working area to the rear of the vehicle and drive more safely when reversing. The monitor in the cab switches automatically to the rear view when reverse gear is engaged. You can also set continuous or manual operation. A rear-view camera also provides a view of the work being performed by the machine and helps when attaching or detaching trailers. A rear-view camera can be fitted to any type of agricultural machinery.
When in the cab of machines such as on telehandlers, material handlers or excavators, your view of the tools being used is often limited. This work is often very specific, so tool-view cameras provide optimum visibility for all activities that are out of your direct line of sight. For example, having a view of clamps, tilters, forks, plows or excavator buckets will lead to reduced operating time and substantially increased safety.
With our front-view camera, you always have a clear view of what's going on in front of the machine. A front-end loader on a tractor, for example, blocks your view, making it more difficult to see the area in front of the machine. The front-view camera looks past these blockages, providing a wide view of the machine's surroundings and allowing you to prevent collisions and work more efficiently.
With a camera combined with RadarEye on your tractor or machine, you can always drive safely. This camera system is equipped with sensors that immediately warn you of dangerous situations via sound signals and graphic overlays. The Orlaco RadarEye system can be enhanced with multiple sensors, for example to detect hazardous areas around the machine.
Cross view is the solution for tractors with large front-end attachments such as front mowers or counterweights. Turning or crossing roads can be very hazardous when using front-end attachments, as the operator has a very limited view—or no view at all—of the intersecting road, being too far away from the front of the vehicle to see. Cross view is the solution. Two cameras on the left and right of the front-end section provide the view you need be able to safely turn or cross the road.
The Orlaco SurroundView system offers you a 360° overview around the machine without any delay. As the images are not merged using software, everything around the machine remains visible without any blurry, distorted overlaps. The images can be displayed in various layouts, which can be switched based on the direction indicators and/or vehicle speed. People and objects in the vicinity of the vehicle are therefore always shown in real time.
Process-view cameras lets you clearly see a multitude of different processes, such as sowing, planting, sprinkling and harvesting — all from inside the machine. The monitor in the cab provides a continuous view (of the tipper when harvesting, for example) and promptly shows you when the dumper is almost full; this helps you work more efficiently. Enhance comfort and efficiency, and avoid damage with a process-view solution for your agricultural machinery.